Django2.0手册: and

Django2.0手册 AI君 570℃

django-admin is Django’s command-line utility for administrative tasks.
This document outlines all it can do.

In addition, is automatically created in each Django project. does the same thing as django-admin but takes care of a few
things for you:

  • It puts your project’s package on sys.path.
  • It sets the DJANGO_SETTINGS_MODULE environment variable so that
    it points to your project’s file.

The django-admin script should be on your system path if you installed
Django via its utility. If it’s not on your path, you can find it
in site-packages/django/bin within your Python installation. Consider
symlinking it from some place on your path, such as /usr/local/bin.

For Windows users, who do not have symlinking functionality available, you can
copy django-admin.exe to a location on your existing path or edit the
PATH settings (under Settings - Control Panel - System - Advanced -
) to point to its installed location.

Generally, when working on a single Django project, it’s easier to use than django-admin. If you need to switch between multiple
Django settings files, use django-admin with
DJANGO_SETTINGS_MODULE or the --settings command line

The command-line examples throughout this document use django-admin to
be consistent, but any example can use or python -m django
just as well.


$ django-admin <command> [options]
$ <command> [options]
$ python -m django <command> [options]

command should be one of the commands listed in this document.
options, which is optional, should be zero or more of the options available
for the given command.

Getting runtime help

django-admin help

Run django-admin help to display usage information and a list of the
commands provided by each application.

Run django-admin help --commands to display a list of all available

Run django-admin help <command> to display a description of the given
command and a list of its available options.

App names

Many commands take a list of “app names.” An “app name” is the basename of
the package containing your models. For example, if your INSTALLED_APPS
contains the string '', the app name is blog.

Determining the version

django-admin version

Run django-admin version to display the current Django version.

The output follows the schema described in PEP 440:


Displaying debug output

Use --verbosity to specify the amount of notification and debug
information that django-admin prints to the console.

Available commands¶


django-admin check [app_label [app_label ...]]

Uses the system check framework to inspect the entire
Django project for common problems.

By default, all apps will be checked. You can check a subset of apps by
providing a list of app labels as arguments:

django-admin check auth admin myapp

If you do not specify any app, all apps will be checked.

--tag TAGS, -t TAGS

The system check framework performs many different types of checks that are
categorized with tags. You can use these
tags to restrict the checks performed to just those in a particular category.
For example, to perform only models and compatibility checks, run:

django-admin check --tag models --tag compatibility

Lists all available tags.


Activates some additional checks that are only relevant in a deployment setting.

You can use this option in your local development environment, but since your
local development settings module may not have many of your production settings,
you will probably want to point the check command at a different settings
module, either by setting the DJANGO_SETTINGS_MODULE environment variable,
or by passing the --settings option:

django-admin check --deploy --settings=production_settings

Or you could run it directly on a production or staging deployment to verify
that the correct settings are in use (omitting --settings). You could even
make it part of your integration test suite.


Specifies the message level that will cause the command to exit with a non-zero
status. Default is ERROR.


django-admin compilemessages

Compiles .po files created by makemessages to .mo files for
use with the built-in gettext support. See 国际化和本地化.

--locale LOCALE, -l LOCALE

Specifies the locale(s) to process. If not provided, all locales are processed.

--exclude EXCLUDE, -x EXCLUDE

Specifies the locale(s) to exclude from processing. If not provided, no locales
are excluded.

--use-fuzzy, -f

Includes fuzzy translations into compiled files.

Example usage:

django-admin compilemessages --locale=pt_BR
django-admin compilemessages --locale=pt_BR --locale=fr -f
django-admin compilemessages -l pt_BR
django-admin compilemessages -l pt_BR -l fr --use-fuzzy
django-admin compilemessages --exclude=pt_BR
django-admin compilemessages --exclude=pt_BR --exclude=fr
django-admin compilemessages -x pt_BR
django-admin compilemessages -x pt_BR -x fr


django-admin createcachetable

Creates the cache tables for use with the database cache backend using the
information from your settings file. See Django’s cache framework for more

--database DATABASE

Specifies the database in which the cache table(s) will be created. Defaults to


Prints the SQL that would be run without actually running it, so you can
customize it or use the migrations framework.


django-admin dbshell

Runs the command-line client for the database engine specified in your
ENGINE setting, with the connection parameters
specified in your USER, PASSWORD, etc., settings.

  • For PostgreSQL, this runs the psql command-line client.
  • For MySQL, this runs the mysql command-line client.
  • For SQLite, this runs the sqlite3 command-line client.
  • For Oracle, this runs the sqlplus command-line client.

This command assumes the programs are on your PATH so that a simple call to
the program name (psql, mysql, sqlite3, sqlplus) will find the
program in the right place. There’s no way to specify the location of the
program manually.

--database DATABASE

Specifies the database onto which to open a shell. Defaults to default.


django-admin diffsettings

Displays differences between the current settings file and Django’s default
settings (or another settings file specified by --default).

Settings that don’t appear in the defaults are followed by "###". For
example, the default settings don’t define ROOT_URLCONF, so
ROOT_URLCONF is followed by "###" in the output of


Displays all settings, even if they have Django’s default value. Such settings
are prefixed by "###".

--default MODULE
New in Django 1.11.

The settings module to compare the current settings against. Leave empty to
compare against Django’s default settings.

--output {hash,unified}
New in Django 2.0.

Specifies the output format. Available values are hash and unified.
hash is the default mode that displays the output that’s described above.
unified displays the output similar to diff -u. Default settings are
prefixed with a minus sign, followed by the changed setting prefixed with a
plus sign.


django-admin dumpdata [app_label[.ModelName] [app_label[.ModelName] ...]]

Outputs to standard output all data in the database associated with the named

If no application name is provided, all installed applications will be dumped.

The output of dumpdata can be used as input for loaddata.

Note that dumpdata uses the default manager on the model for selecting the
records to dump. If you’re using a custom manager as
the default manager and it filters some of the available records, not all of the
objects will be dumped.

--all, -a

Uses Django’s base manager, dumping records which might otherwise be filtered
or modified by a custom manager.

--format FORMAT

Specifies the serialization format of the output. Defaults to JSON. Supported
formats are listed in Serialization formats.

--indent INDENT

Specifies the number of indentation spaces to use in the output. Defaults to
None which displays all data on single line.

--exclude EXCLUDE, -e EXCLUDE

Prevents specific applications or models (specified in the form of
app_label.ModelName) from being dumped. If you specify a model name, the
output will be restricted to that model, rather than the entire application.
You can also mix application names and model names.

If you want to exclude multiple applications, pass --exclude more than

django-admin dumpdata --exclude=auth --exclude=contenttypes
--database DATABASE

Specifies the database from which data will be dumped. Defaults to default.


Uses the natural_key() model method to serialize any foreign key and
many-to-many relationship to objects of the type that defines the method. If
you’re dumping contrib.auth Permission objects or
contrib.contenttypes ContentType objects, you should probably use this
flag. See the natural keys
documentation for more details on this and the next option.


Omits the primary key in the serialized data of this object since it can be
calculated during deserialization.


Outputs only the objects specified by a comma separated list of primary keys.
This is only available when dumping one model. By default, all the records of
the model are output.

--output OUTPUT, -o OUTPUT

Specifies a file to write the serialized data to. By default, the data goes to
standard output.

When this option is set and --verbosity is greater than 0 (the default), a
progress bar is shown in the terminal.


django-admin flush

Removes all data from the database and re-executes any post-synchronization
handlers. The table of which migrations have been applied is not cleared.

If you would rather start from an empty database and re-run all migrations, you
should drop and recreate the database and then run migrate instead.

--noinput, --no-input

Suppresses all user prompts.

--database DATABASE

Specifies the database to flush. Defaults to default.


django-admin inspectdb [table [table ...]]

Introspects the database tables in the database pointed-to by the
NAME setting and outputs a Django model module (a
file) to standard output. You may choose what tables to inspect by passing
their names as arguments.

Use this if you have a legacy database with which you’d like to use Django.
The script will inspect the database and create a model for each table within

As you might expect, the created models will have an attribute for every field
in the table. Note that inspectdb has a few special cases in its field-name

  • If inspectdb cannot map a column’s type to a model field type, it’ll
    use TextField and will insert the Python comment
    'This field type is a guess.' next to the field in the generated
    model. The recognized fields may depend on apps listed in
    INSTALLED_APPS. For example, django.contrib.postgres adds
    recognition for several PostgreSQL-specific field types.
  • If the database column name is a Python reserved word (such as
    'pass', 'class' or 'for'), inspectdb will append
    '_field' to the attribute name. For example, if a table has a column
    'for', the generated model will have a field 'for_field', with
    the db_column attribute set to 'for'. inspectdb will insert
    the Python comment
    'Field renamed because it was a Python reserved word.' next to the

This feature is meant as a shortcut, not as definitive model generation. After
you run it, you’ll want to look over the generated models yourself to make
customizations. In particular, you’ll need to rearrange models’ order, so that
models that refer to other models are ordered properly.

Primary keys are automatically introspected for PostgreSQL, MySQL and
SQLite, in which case Django puts in the primary_key=True where

inspectdb works with PostgreSQL, MySQL and SQLite. Foreign-key detection
only works in PostgreSQL and with certain types of MySQL tables.

Django doesn’t create database defaults when a
default is specified on a model field.
Similarly, database defaults aren’t translated to model field defaults or
detected in any fashion by inspectdb.

By default, inspectdb creates unmanaged models. That is, managed = False
in the model’s Meta class tells Django not to manage each table’s creation,
modification, and deletion. If you do want to allow Django to manage the
table’s lifecycle, you’ll need to change the
managed option to True (or simply remove
it because True is its default value).

--database DATABASE

Specifies the database to introspect. Defaults to default.


django-admin loaddata fixture [fixture ...]

Searches for and loads the contents of the named fixture into the database.

--database DATABASE

Specifies the database into which the data will be loaded. Defaults to

--ignorenonexistent, -i

Ignores fields and models that may have been removed since the fixture was
originally generated.


Specifies a single app to look for fixtures in rather than looking in all apps.

--format FORMAT
New in Django 2.0.

Specifies the serialization format (e.g.,
json or xml) for fixtures read from stdin.

--exclude EXCLUDE, -e EXCLUDE
New in Django 1.11.

Excludes loading the fixtures from the given applications and/or models (in the
form of app_label or app_label.ModelName). Use the option multiple
times to exclude more than one app or model.

What’s a “fixture”?

A fixture is a collection of files that contain the serialized contents of
the database. Each fixture has a unique name, and the files that comprise the
fixture can be distributed over multiple directories, in multiple applications.

Django will search in three locations for fixtures:

  1. In the fixtures directory of every installed application
  2. In any directory named in the FIXTURE_DIRS setting
  3. In the literal path named by the fixture

Django will load any and all fixtures it finds in these locations that match
the provided fixture names.

If the named fixture has a file extension, only fixtures of that type
will be loaded. For example:

django-admin loaddata mydata.json

would only load JSON fixtures called mydata. The fixture extension
must correspond to the registered name of a
serializer (e.g., json or xml).

If you omit the extensions, Django will search all available fixture types
for a matching fixture. For example:

django-admin loaddata mydata

would look for any fixture of any fixture type called mydata. If a fixture
directory contained mydata.json, that fixture would be loaded
as a JSON fixture.

The fixtures that are named can include directory components. These
directories will be included in the search path. For example:

django-admin loaddata foo/bar/mydata.json

would search <app_label>/fixtures/foo/bar/mydata.json for each installed
application, <dirname>/foo/bar/mydata.json for each directory in
FIXTURE_DIRS, and the literal path foo/bar/mydata.json.

When fixture files are processed, the data is saved to the database as is.
Model defined save() methods are not called, and
any pre_save or
post_save signals will be called with
raw=True since the instance only contains attributes that are local to the
model. You may, for example, want to disable handlers that access
related fields that aren’t present during fixture loading and would otherwise
raise an exception:

from django.db.models.signals import post_save
from .models import MyModel

def my_handler(**kwargs):
    # disable the handler during fixture loading
    if kwargs['raw']:

post_save.connect(my_handler, sender=MyModel)

You could also write a simple decorator to encapsulate this logic:

from functools import wraps

def disable_for_loaddata(signal_handler):
    Decorator that turns off signal handlers when loading fixture data.
    def wrapper(*args, **kwargs):
        if kwargs['raw']:
        signal_handler(*args, **kwargs)
    return wrapper

def my_handler(**kwargs):

Just be aware that this logic will disable the signals whenever fixtures are
deserialized, not just during loaddata.

Note that the order in which fixture files are processed is undefined. However,
all fixture data is installed as a single transaction, so data in
one fixture can reference data in another fixture. If the database backend
supports row-level constraints, these constraints will be checked at the
end of the transaction.

The dumpdata command can be used to generate input for loaddata.

Compressed fixtures

Fixtures may be compressed in zip, gz, or bz2 format. For example:

django-admin loaddata mydata.json

would look for any of mydata.json,,
mydata.json.gz, or mydata.json.bz2. The first file contained within a
zip-compressed archive is used.

Note that if two fixtures with the same name but different
fixture type are discovered (for example, if mydata.json and
mydata.xml.gz were found in the same fixture directory), fixture
installation will be aborted, and any data installed in the call to
loaddata will be removed from the database.

MySQL with MyISAM and fixtures

The MyISAM storage engine of MySQL doesn’t support transactions or
constraints, so if you use MyISAM, you won’t get validation of fixture
data, or a rollback if multiple transaction files are found.

Database-specific fixtures

If you’re in a multi-database setup, you might have fixture data that
you want to load onto one database, but not onto another. In this
situation, you can add a database identifier into the names of your fixtures.

For example, if your DATABASES setting has a ‘master’ database
defined, name the fixture mydata.master.json or
mydata.master.json.gz and the fixture will only be loaded when you
specify you want to load data into the master database.

Loading fixtures from stdin

New in Django 2.0.

You can use a dash as the fixture name to load input from sys.stdin. For

django-admin loaddata --format=json -

When reading from stdin, the --format option
is required to specify the serialization format
of the input (e.g., json or xml).

Loading from stdin is useful with standard input and output redirections.
For example:

django-admin dumpdata --format=json --database=test app_label.ModelName | django-admin loaddata --format=json --database=prod -


django-admin makemessages

Runs over the entire source tree of the current directory and pulls out all
strings marked for translation. It creates (or updates) a message file in the
conf/locale (in the Django tree) or locale (for project and application)
directory. After making changes to the messages files you need to compile them
with compilemessages for use with the builtin gettext support. See
the i18n documentation for details.

This command doesn’t require configured settings. However, when settings aren’t
configured, the command can’t ignore the MEDIA_ROOT and
STATIC_ROOT directories or include LOCALE_PATHS. It will
also write files in UTF-8 rather than in FILE_CHARSET.

--all, -a

Updates the message files for all available languages.


Specifies a list of file extensions to examine (default: html, txt,
py or js if --domain is js).

Example usage:

django-admin makemessages --locale=de --extension xhtml

Separate multiple extensions with commas or use -e or --extension
multiple times:

django-admin makemessages --locale=de --extension=html,txt --extension xml
--locale LOCALE, -l LOCALE

Specifies the locale(s) to process.

--exclude EXCLUDE, -x EXCLUDE

Specifies the locale(s) to exclude from processing. If not provided, no locales
are excluded.

Example usage:

django-admin makemessages --locale=pt_BR
django-admin makemessages --locale=pt_BR --locale=fr
django-admin makemessages -l pt_BR
django-admin makemessages -l pt_BR -l fr
django-admin makemessages --exclude=pt_BR
django-admin makemessages --exclude=pt_BR --exclude=fr
django-admin makemessages -x pt_BR
django-admin makemessages -x pt_BR -x fr
--domain DOMAIN, -d DOMAIN

Specifies the domain of the messages files. Supported options are:

  • django for all *.py, *.html and *.txt files (default)
  • djangojs for *.js files

Follows symlinks to directories when looking for new translation strings.

Example usage:

django-admin makemessages --locale=de --symlinks
--ignore PATTERN, -i PATTERN

Ignores files or directories matching the given glob-style pattern. Use
multiple times to ignore more.

These patterns are used by default: 'CVS', '.*', '*~', '*.pyc'.

Example usage:

django-admin makemessages --locale=en_US --ignore=apps/* --ignore=secret/*.html

Disables the default values of --ignore.


Disables breaking long message lines into several lines in language files.


Suppresses writing ‘#: filename:line’ comment lines in language files.
Using this option makes it harder for technically skilled translators to
understand each message’s context.

--add-location [{full,file,never}]
New in Django 2.0.

Controls #: filename:line comment lines in language files. If the option

  • full (the default if not given): the lines include both file name and
    line number.
  • file: the line number is omitted.
  • never: the lines are suppressed (same as --no-location).

Requires gettext 0.19 or newer.


Prevents deleting the temporary .pot files generated before creating the
.po file. This is useful for debugging errors which may prevent the final
language files from being created.

See also

See Customizing the makemessages command for instructions on how to customize
the keywords that makemessages passes to xgettext.


django-admin makemigrations [app_label [app_label ...]]

Creates new migrations based on the changes detected to your models.
Migrations, their relationship with apps and more are covered in depth in
the migrations documentation.

Providing one or more app names as arguments will limit the migrations created
to the app(s) specified and any dependencies needed (the table at the other end
of a ForeignKey, for example).

To add migrations to an app that doesn’t have a migrations directory, run
makemigrations with the app’s app_label.

--noinput, --no-input

Suppresses all user prompts. If a suppressed prompt cannot be resolved
automatically, the command will exit with error code 3.


Outputs an empty migration for the specified apps, for manual editing. This is
for advanced users and should not be used unless you are familiar with the
migration format, migration operations, and the dependencies between your


Shows what migrations would be made without actually writing any migrations
files to disk. Using this option along with --verbosity 3 will also show
the complete migrations files that would be written.


Enables fixing of migration conflicts.

--name NAME, -n NAME

Allows naming the generated migration(s) instead of using a generated name.


Makes makemigrations exit with a non-zero status when model changes without
migrations are detected.


django-admin migrate [app_label] [migration_name]

Synchronizes the database state with the current set of models and migrations.
Migrations, their relationship with apps and more are covered in depth in
the migrations documentation.

The behavior of this command changes depending on the arguments provided:

  • No arguments: All apps have all of their migrations run.
  • <app_label>: The specified app has its migrations run, up to the most
    recent migration. This may involve running other apps’ migrations too, due
    to dependencies.
  • <app_label> <migrationname>: Brings the database schema to a state where
    the named migration is applied, but no later migrations in the same app are
    applied. This may involve unapplying migrations if you have previously
    migrated past the named migration. Use the name zero to unapply all
    migrations for an app.
--database DATABASE

Specifies the database to migrate. Defaults to default.


Marks the migrations up to the target one (following the rules above) as
applied, but without actually running the SQL to change your database schema.

This is intended for advanced users to manipulate the
current migration state directly if they’re manually applying changes;
be warned that using --fake runs the risk of putting the migration state
table into a state where manual recovery will be needed to make migrations
run correctly.


Allows Django to skip an app’s initial migration if all database tables with
the names of all models created by all
CreateModel operations in that
migration already exist. This option is intended for use when first running
migrations against a database that preexisted the use of migrations. This
option does not, however, check for matching database schema beyond matching
table names and so is only safe to use if you are confident that your existing
schema matches what is recorded in your initial migration.


Allows creating tables for apps without migrations. While this isn’t
recommended, the migrations framework is sometimes too slow on large projects
with hundreds of models.

--noinput, --no-input

Suppresses all user prompts. An example prompt is asking about removing stale
content types.


django-admin runserver [addrport]

Starts a lightweight development Web server on the local machine. By default,
the server runs on port 8000 on the IP address You can pass in an
IP address and port number explicitly.

If you run this script as a user with normal privileges (recommended), you
might not have access to start a port on a low port number. Low port numbers
are reserved for the superuser (root).

This server uses the WSGI application object specified by the

security audits or performance tests. (And that’s how it’s gonna stay. We’re in
the business of making Web frameworks, not Web servers, so improving this
server to be able to handle a production environment is outside the scope of

The development server automatically reloads Python code for each request, as
needed. You don’t need to restart the server for code changes to take effect.
However, some actions like adding files don’t trigger a restart, so you’ll
have to restart the server in these cases.

If you are using Linux and install pyinotify, kernel signals will be used to
autoreload the server (rather than polling file modification timestamps each
second). This offers better scaling to large projects, reduction in response
time to code modification, more robust change detection, and battery usage

When you start the server, and each time you change Python code while the
server is running, the system check framework will check your entire Django
project for some common errors (see the check command). If any
errors are found, they will be printed to standard output.

You can run as many concurrent servers as you want, as long as they’re on
separate ports. Just execute django-admin runserver more than once.

Note that the default IP address,, is not accessible from other
machines on your network. To make your development server viewable to other
machines on the network, use its own IP address (e.g. or or :: (with IPv6 enabled).

You can provide an IPv6 address surrounded by brackets
(e.g. [200a::1]:8000). This will automatically enable IPv6 support.

A hostname containing ASCII-only characters can also be used.

If the staticfiles contrib app is enabled
(default in new projects) the runserver command will be overridden
with its own runserver command.

Logging of each request and response of the server is sent to the
django.server logger.


Disables the auto-reloader. This means any Python code changes you make while
the server is running will not take effect if the particular Python modules
have already been loaded into memory.


Disables use of threading in the development server. The server is
multithreaded by default.

--ipv6, -6

Uses IPv6 for the development server. This changes the default IP address from to ::1.

Examples of using different ports and addresses

Port 8000 on IP address

django-admin runserver

Port 8000 on IP address

django-admin runserver

Port 7000 on IP address

django-admin runserver 7000

Port 7000 on IP address

django-admin runserver

Port 8000 on IPv6 address ::1:

django-admin runserver -6

Port 7000 on IPv6 address ::1:

django-admin runserver -6 7000

Port 7000 on IPv6 address 2001:0db8:1234:5678::9:

django-admin runserver [2001:0db8:1234:5678::9]:7000

Port 8000 on IPv4 address of host localhost:

django-admin runserver localhost:8000

Port 8000 on IPv6 address of host localhost:

django-admin runserver -6 localhost:8000

Serving static files with the development server

By default, the development server doesn’t serve any static files for your site
(such as CSS files, images, things under MEDIA_URL and so forth). If
you want to configure Django to serve static media, read
Managing static files (e.g. images, JavaScript, CSS).


django-admin sendtestemail [email [email ...]]

Sends a test email (to confirm email sending through Django is working) to the
recipient(s) specified. For example:

django-admin sendtestemail

There are a couple of options, and you may use any combination of them


Mails the email addresses specified in MANAGERS using


Mails the email addresses specified in ADMINS using


django-admin shell

Starts the Python interactive interpreter.

--interface {ipython,bpython,python}, -i {ipython,bpython,python}

Specifies the shell to use. By default, Django will use IPython or bpython if
either is installed. If both are installed, specify which one you want like so:


django-admin shell -i ipython


django-admin shell -i bpython

If you have a “rich” shell installed but want to force use of the “plain”
Python interpreter, use python as the interface name, like so:

django-admin shell -i python

Disables reading the startup script for the “plain” Python interpreter. By
default, the script pointed to by the PYTHONSTARTUP environment
variable or the ~/ script is read.

--command COMMAND, -c COMMAND

Lets you pass a command as a string to execute it as Django, like so:

django-admin shell --command="import django; print(django.__version__)"

You can also pass code in on standard input to execute it. For example:

$ django-admin shell <<EOF
> import django
> print(django.__version__)

On Windows, the REPL is output due to implementation limits of on that platform.

Changed in Django 1.11:

In older versions, the REPL is also output on UNIX systems.


django-admin showmigrations [app_label [app_label ...]]

Shows all migrations in a project. You can choose from one of two formats:

--list, -l

Lists all of the apps Django knows about, the migrations available for each
app, and whether or not each migration is applied (marked by an [X] next to
the migration name).

Apps without migrations are also listed, but have (no migrations) printed
under them.

This is the default output format.

--plan, -p

Shows the migration plan Django will follow to apply migrations. Like
--list, applied migrations are marked by an [X]. For a --verbosity
of 2 and above, all dependencies of a migration will also be shown.

app_labels arguments limit the output, however, dependencies of provided
apps may also be included.

Changed in Django 1.11:

In older versions, showmigrations --plan ignores app labels.

--database DATABASE

Specifies the database to examine. Defaults to default.


django-admin sqlflush

Prints the SQL statements that would be executed for the flush

--database DATABASE

Specifies the database for which to print the SQL. Defaults to default.


django-admin sqlmigrate app_label migration_name

Prints the SQL for the named migration. This requires an active database
connection, which it will use to resolve constraint names; this means you must
generate the SQL against a copy of the database you wish to later apply it on.

Note that sqlmigrate doesn’t colorize its output.


Generates the SQL for unapplying the migration. By default, the SQL created is
for running the migration in the forwards direction.

--database DATABASE

Specifies the database for which to generate the SQL. Defaults to default.


django-admin sqlsequencereset app_label [app_label ...]

Prints the SQL statements for resetting sequences for the given app name(s).

Sequences are indexes used by some database engines to track the next available
number for automatically incremented fields.

Use this command to generate SQL which will fix cases where a sequence is out
of sync with its automatically incremented field data.

--database DATABASE

Specifies the database for which to print the SQL. Defaults to default.


django-admin squashmigrations app_label [start_migration_name] migration_name

Squashes the migrations for app_label up to and including migration_name
down into fewer migrations, if possible. The resulting squashed migrations
can live alongside the unsquashed ones safely. For more information,
please read Squashing migrations.

When start_migration_name is given, Django will only include migrations
starting from and including this migration. This helps to mitigate the
squashing limitation of RunPython and
django.db.migrations.operations.RunSQL migration operations.


Disables the optimizer when generating a squashed migration. By default, Django
will try to optimize the operations in your migrations to reduce the size of
the resulting file. Use this option if this process is failing or creating
incorrect migrations, though please also file a Django bug report about the
behavior, as optimization is meant to be safe.

--noinput, --no-input

Suppresses all user prompts.

--squashed-name SQUASHED_NAME
New in Django 2.0.

Sets the name of the squashed migration. When omitted, the name is based on the
first and last migration, with _squashed_ in between.


django-admin startapp name [directory]

Creates a Django app directory structure for the given app name in the current
directory or the given destination.

By default the directory created contains a file and other app
template files. (See the source for more details.) If only the app
name is given, the app directory will be created in the current working

If the optional destination is provided, Django will use that existing
directory rather than creating a new one. You can use ‘.’ to denote the current
working directory.

For example:

django-admin startapp myapp /Users/jezdez/Code/myapp

--template TEMPLATE

Provides the path to a directory with a custom app template file or a path to a
compressed file (.tar.gz, .tar.bz2, .tgz, .tbz, .zip)
containing the app template files.

For example, this would look for an app template in the given directory when
creating the myapp app:

django-admin startapp --template=/Users/jezdez/Code/my_app_template myapp

Django will also accept URLs (http, https, ftp) to compressed
archives with the app template files, downloading and extracting them on the

For example, taking advantage of GitHub’s feature to expose repositories as
zip files, you can use a URL like:

django-admin startapp --template= myapp

Specifies which file extensions in the app template should be rendered with the
template engine. Defaults to py.

--name FILES, -n FILES

Specifies which files in the app template (in addition to those matching
--extension) should be rendered with the template engine. Defaults to an
empty list.

The template context used for all matching
files is:

  • Any option passed to the startapp command (among the command’s supported
  • app_name — the app name as passed to the command
  • app_directory — the full path of the newly created app
  • camel_case_app_name — the app name in camel case format
  • docs_version — the version of the documentation: 'dev' or '1.x'
  • django_version — the version of Django, e.g.“’2.0.3’“


When the app template files are rendered with the Django template
engine (by default all *.py files), Django will also replace all
stray template variables contained. For example, if one of the Python files
contains a docstring explaining a particular feature related
to template rendering, it might result in an incorrect example.

To work around this problem, you can use the templatetag
template tag to “escape” the various parts of the template syntax.

In addition, to allow Python template files that contain Django template
language syntax while also preventing packaging systems from trying to
byte-compile invalid *.py files, template files ending with .py-tpl
will be renamed to .py.


django-admin startproject name [directory]

Creates a Django project directory structure for the given project name in
the current directory or the given destination.

By default, the new directory contains and a project package
(containing a and other files). See the template source for

If only the project name is given, both the project directory and project
package will be named <projectname> and the project directory
will be created in the current working directory.

If the optional destination is provided, Django will use that existing
directory as the project directory, and create and the project
package within it. Use ‘.’ to denote the current working directory.

For example:

django-admin startproject myproject /Users/jezdez/Code/myproject_repo
--template TEMPLATE

Specifies a directory, file path, or URL of a custom project template. See the
startapp --template documentation for examples and usage.


Specifies which file extensions in the project template should be rendered with
the template engine. Defaults to py.

--name FILES, -n FILES

Specifies which files in the project template (in addition to those matching
--extension) should be rendered with the template engine. Defaults to an
empty list.

The template context used is:

  • Any option passed to the startproject command (among the command’s
    supported options)
  • project_name — the project name as passed to the command
  • project_directory — the full path of the newly created project
  • secret_key — a random key for the SECRET_KEY setting
  • docs_version — the version of the documentation: 'dev' or '1.x'
  • django_version — the version of Django, e.g.“’2.0.3’“

Please also see the rendering warning as mentioned
for startapp.


django-admin test [test_label [test_label ...]]

Runs tests for all installed apps. See Testing in Django for more


Stops running tests and reports the failure immediately after a test fails.

--testrunner TESTRUNNER

Controls the test runner class that is used to execute tests. This value
overrides the value provided by the TEST_RUNNER setting.

--noinput, --no-input

Suppresses all user prompts. A typical prompt is a warning about deleting an
existing test database.

Test runner options

The test command receives options on behalf of the specified
--testrunner. These are the options of the default test runner:

--keepdb, -k

Preserves the test database between test runs. This has the advantage of
skipping both the create and destroy actions which can greatly decrease the
time to run tests, especially those in a large test suite. If the test database
does not exist, it will be created on the first run and then preserved for each
subsequent run. Any unapplied migrations will also be applied to the test
database before running the test suite.

--reverse, -r

Sorts test cases in the opposite execution order. This may help in debugging
the side effects of tests that aren’t properly isolated. Grouping by test
is preserved when using this option.

New in Django 1.11.

Sets the DEBUG setting to True prior to running tests. This may
help troubleshoot test failures.

--debug-sql, -d

Enables SQL logging for failing tests. If
--verbosity is 2, then queries in passing tests are also output.

--parallel [N]

Runs tests in separate parallel processes. Since modern processors have
multiple cores, this allows running tests significantly faster.

By default --parallel runs one process per core according to
multiprocessing.cpu_count(). You can adjust the number of processes
either by providing it as the option’s value, e.g. --parallel=4, or by
setting the DJANGO_TEST_PROCESSES environment variable.

Django distributes test cases — unittest.TestCase subclasses — to
subprocesses. If there are fewer test cases than configured processes, Django
will reduce the number of processes accordingly.

Each process gets its own database. You must ensure that different test cases
don’t access the same resources. For instance, test cases that touch the
filesystem should create a temporary directory for their own use.

This option requires the third-party tblib package to display tracebacks

$ pip install tblib

This feature isn’t available on Windows. It doesn’t work with the Oracle
database backend either.

If you want to use pdb while debugging tests, you must disable parallel
execution (--parallel=1). You’ll see something like bdb.BdbQuit if you


When test parallelization is enabled and a test fails, Django may be
unable to display the exception traceback. This can make debugging
difficult. If you encounter this problem, run the affected test without
parallelization to see the traceback of the failure.

This is a known limitation. It arises from the need to serialize objects
in order to exchange them between processes. See
What can be pickled and unpickled? for details.

--tag TAGS

Runs only tests marked with the specified tags.
May be specified multiple times and combined with test --exclude-tag.

--exclude-tag EXCLUDE_TAGS

Excludes tests marked with the specified tags.
May be specified multiple times and combined with test --tag.


django-admin testserver [fixture [fixture ...]]

Runs a Django development server (as in runserver) using data from
the given fixture(s).

For example, this command:

django-admin testserver mydata.json

…would perform the following steps:

  1. Create a test database, as described in The test database.
  2. Populate the test database with fixture data from the given fixtures.
    (For more on fixtures, see the documentation for loaddata above.)
  3. Runs the Django development server (as in runserver), pointed at
    this newly created test database instead of your production database.

This is useful in a number of ways:

  • When you’re writing unit tests of how your views
    act with certain fixture data, you can use testserver to interact with
    the views in a Web browser, manually.
  • Let’s say you’re developing your Django application and have a “pristine”
    copy of a database that you’d like to interact with. You can dump your
    database to a fixture (using the dumpdata command, explained
    above), then use testserver to run your Web application with that data.
    With this arrangement, you have the flexibility of messing up your data
    in any way, knowing that whatever data changes you’re making are only
    being made to a test database.

Note that this server does not automatically detect changes to your Python
source code (as runserver does). It does, however, detect changes to

--addrport ADDRPORT

Specifies a different port, or IP address and port, from the default of This value follows exactly the same format and serves
exactly the same function as the argument to the runserver command.


To run the test server on port 7000 with fixture1 and fixture2:

django-admin testserver --addrport 7000 fixture1 fixture2
django-admin testserver fixture1 fixture2 --addrport 7000

(The above statements are equivalent. We include both of them to demonstrate
that it doesn’t matter whether the options come before or after the fixture

To run on with a test fixture:

django-admin testserver --addrport test
--noinput, --no-input

Suppresses all user prompts. A typical prompt is a warning about deleting an
existing test database.

Commands provided by applications¶

Some commands are only available when the django.contrib application that
implements them has been
enabled. This section describes them grouped by
their application.



django-admin changepassword [<username>]

This command is only available if Django’s authentication system (django.contrib.auth) is installed.

Allows changing a user’s password. It prompts you to enter a new password twice
for the given user. If the entries are identical, this immediately becomes the
new password. If you do not supply a user, the command will attempt to change
the password whose username matches the current user.

--database DATABASE

Specifies the database to query for the user. Defaults to default.

Example usage:

django-admin changepassword ringo


django-admin createsuperuser

This command is only available if Django’s authentication system (django.contrib.auth) is installed.

Creates a superuser account (a user who has all permissions). This is
useful if you need to create an initial superuser account or if you need to
programmatically generate superuser accounts for your site(s).

When run interactively, this command will prompt for a password for
the new superuser account. When run non-interactively, no password
will be set, and the superuser account will not be able to log in until
a password has been manually set for it.

--username USERNAME
--email EMAIL

The username and email address for the new account can be supplied by
using the --username and --email arguments on the command
line. If either of those is not supplied, createsuperuser will prompt for
it when running interactively.

--database DATABASE

Specifies the database into which the superuser object will be saved.

You can subclass the management command and override get_input_data() if you
want to customize data input and validation. Consult the source code for
details on the existing implementation and the method’s parameters. For example,
it could be useful if you have a ForeignKey in
allow creating an instance instead of entering the primary key of an existing



django-admin remove_stale_contenttypes
New in Django 1.11.

This command is only available if Django’s contenttypes app (django.contrib.contenttypes) is installed.

Deletes stale content types (from deleted models) in your database. Any objects
that depend on the deleted content types will also be deleted. A list of
deleted objects will be displayed before you confirm it’s okay to proceed with
the deletion.

--database DATABASE

Specifies the database to use. Defaults to default.



This command is only available if GeoDjango
(django.contrib.gis) is installed.

Please refer to its description in the GeoDjango



django-admin clearsessions

Can be run as a cron job or directly to clean out expired sessions.



This command is only available if the Sitemaps framework (django.contrib.sitemaps) is installed.

Please refer to its description in the Sitemaps



This command is only available if the static files application (django.contrib.staticfiles) is installed.

Please refer to its description in the
staticfiles documentation.


This command is only available if the static files application (django.contrib.staticfiles) is installed.

Please refer to its description in the staticfiles documentation.

Default options¶

Although some commands may allow their own custom options, every command
allows for the following options:

--pythonpath PYTHONPATH

Adds the given filesystem path to the Python import search path. If this
isn’t provided, django-admin will use the PYTHONPATH environment

This option is unnecessary in, because it takes care of setting
the Python path for you.

Example usage:

django-admin migrate --pythonpath='/home/djangoprojects/myproject'
--settings SETTINGS

Specifies the settings module to use. The settings module should be in Python
package syntax, e.g. mysite.settings. If this isn’t provided,
django-admin will use the DJANGO_SETTINGS_MODULE environment variable.

This option is unnecessary in, because it uses from the current project by default.

Example usage:

django-admin migrate --settings=mysite.settings

Displays a full stack trace when a CommandError
is raised. By default, django-admin will show a simple error message when a
CommandError occurs and a full stack trace for any other exception.

Example usage:

django-admin migrate --traceback
--verbosity {0,1,2,3}, -v {0,1,2,3}

Specifies the amount of notification and debug information that a command
should print to the console.

  • 0 means no output.
  • 1 means normal output (default).
  • 2 means verbose output.
  • 3 means very verbose output.

Example usage:

django-admin migrate --verbosity 2

Disables colorized command output. Some commands format their output to be
colorized. For example, errors will be printed to the console in red and SQL
statements will be syntax highlighted.

Example usage:

django-admin runserver --no-color

Extra niceties¶

Syntax coloring

The django-admin / commands will use pretty
color-coded output if your terminal supports ANSI-colored output. It
won’t use the color codes if you’re piping the command’s output to
another program.

Under Windows, the native console doesn’t support ANSI escape sequences so by
default there is no color output. But you can install the ANSICON
third-party tool, the Django commands will detect its presence and will make
use of its services to color output just like on Unix-based platforms.

The colors used for syntax highlighting can be customized. Django
ships with three color palettes:

  • dark, suited to terminals that show white text on a black
    background. This is the default palette.
  • light, suited to terminals that show black text on a white
  • nocolor, which disables syntax highlighting.

You select a palette by setting a DJANGO_COLORS environment
variable to specify the palette you want to use. For example, to
specify the light palette under a Unix or OS/X BASH shell, you
would run the following at a command prompt:

export DJANGO_COLORS="light"

You can also customize the colors that are used. Django specifies a
number of roles in which color is used:

  • error – A major error.
  • notice – A minor error.
  • success – A success.
  • warning – A warning.
  • sql_field – The name of a model field in SQL.
  • sql_coltype – The type of a model field in SQL.
  • sql_keyword – An SQL keyword.
  • sql_table – The name of a model in SQL.
  • http_info – A 1XX HTTP Informational server response.
  • http_success – A 2XX HTTP Success server response.
  • http_not_modified – A 304 HTTP Not Modified server response.
  • http_redirect – A 3XX HTTP Redirect server response other than 304.
  • http_not_found – A 404 HTTP Not Found server response.
  • http_bad_request – A 4XX HTTP Bad Request server response other than 404.
  • http_server_error – A 5XX HTTP Server Error response.
  • migrate_heading – A heading in a migrations management command.
  • migrate_label – A migration name.

Each of these roles can be assigned a specific foreground and
background color, from the following list:

  • black
  • red
  • green
  • yellow
  • blue
  • magenta
  • cyan
  • white

Each of these colors can then be modified by using the following
display options:

  • bold
  • underscore
  • blink
  • reverse
  • conceal

A color specification follows one of the following patterns:

  • role=fg
  • role=fg/bg
  • role=fg,option,option
  • role=fg/bg,option,option

where role is the name of a valid color role, fg is the
foreground color, bg is the background color and each option
is one of the color modifying options. Multiple color specifications
are then separated by a semicolon. For example:

export DJANGO_COLORS="error=yellow/blue,blink;notice=magenta"

would specify that errors be displayed using blinking yellow on blue,
and notices displayed using magenta. All other color roles would be
left uncolored.

Colors can also be specified by extending a base palette. If you put
a palette name in a color specification, all the colors implied by that
palette will be loaded. So:

export DJANGO_COLORS="light;error=yellow/blue,blink;notice=magenta"

would specify the use of all the colors in the light color palette,
except for the colors for errors and notices which would be
overridden as specified.

Bash completion

If you use the Bash shell, consider installing the Django bash completion
script, which lives in extras/django_bash_completion in the Django source
distribution. It enables tab-completion of django-admin and commands, so you can, for instance…

  • Type django-admin.
  • Press [TAB] to see all available options.
  • Type sql, then [TAB], to see all available options whose names start
    with sql.

See Writing custom django-admin commands for how to add customized actions., *args, **options)

To call a management command from code use call_command.

the name of the command to call or a command object. Passing the name is
preferred unless the object is required for testing.
a list of arguments accepted by the command. Arguments are passed to the
argument parser, so you can use the same style as you would on the command
line. For example, call_command('flush', '--verbosity=0').
named options accepted on the command-line. Options are passed to the command
without triggering the argument parser, which means you’ll need to pass the
correct type. For example, call_command('flush', verbosity=0) (zero must
be an integer rather than a string).


from django.core import management
from import loaddata

management.call_command('flush', verbosity=0, interactive=False)
management.call_command('loaddata', 'test_data', verbosity=0)
management.call_command(loaddata.Command(), 'test_data', verbosity=0)

Note that command options that take no arguments are passed as keywords
with True or False, as you can see with the interactive option above.

Named arguments can be passed by using either one of the following syntaxes:

# Similar to the command line
management.call_command('dumpdata', '--natural-foreign')

# Named argument similar to the command line minus the initial dashes and
# with internal dashes replaced by underscores
management.call_command('dumpdata', natural_foreign=True)

# `use_natural_foreign_keys` is the option destination variable
management.call_command('dumpdata', use_natural_foreign_keys=True)

Some command options have different names when using call_command() instead
of django-admin or For example, django-admin
createsuperuser --no-input
translates to call_command('createsuperuser',
. To find what keyword argument name to use for
call_command(), check the command’s source code for the dest argument
passed to parser.add_argument().

Command options which take multiple options are passed a list:

management.call_command('dumpdata', exclude=['contenttypes', 'auth'])

The return value of the call_command() function is the same as the return
value of the handle() method of the command.

Output redirection¶

Note that you can redirect standard output and error streams as all commands
support the stdout and stderr options. For example, you could write:

with open('/path/to/command_output') as f:
    management.call_command('dumpdata', stdout=f)

转载请注明 » Django2.0手册: and

喜欢 (0)or分享 (0)