Django2.0手册:Conditional View Processing

HTTP clients can send a number of headers to tell the server about copies of a
resource that they have already seen. This is commonly used when retrieving a
Web page (using an HTTP GET request) to avoid sending all the data for
something the client has already retrieved. However, the same headers can be
used for all HTTP methods (POST, PUT, DELETE, etc.).

For each page (response) that Django sends back from a view, it might provide
two HTTP headers: the ETag header and the Last-Modified header. These
headers are optional on HTTP responses. They can be set by your view function,
or you can rely on the ConditionalGetMiddleware
middleware to set the ETag header.

When the client next requests the same resource, it might send along a header
such as either If-modified-since or If-unmodified-since, containing the
date of the last modification time it was sent, or either If-match or
If-none-match, containing the last ETag it was sent.
If the current version of the page matches the ETag sent by the client, or
if the resource has not been modified, a 304 status code can be sent back,
instead of a full response, telling the client that nothing has changed.
Depending on the header, if the page has been modified or does not match the
ETag sent by the client, a 412 status code (Precondition Failed) may be
returned.

When you need more fine-grained control you may use per-view conditional
processing functions.

The condition decorator¶

Sometimes (in fact, quite often) you can create functions to rapidly compute the ETag
value or the last-modified time for a resource, without needing to do all
the computations needed to construct the full view. Django can then use these
functions to provide an “early bailout” option for the view processing.
Telling the client that the content has not been modified since the last
request, perhaps.

These two functions are passed as parameters to the
django.views.decorators.http.condition decorator. This decorator uses
the two functions (you only need to supply one, if you can’t compute both
quantities easily and quickly) to work out if the headers in the HTTP request
match those on the resource. If they don’t match, a new copy of the resource
must be computed and your normal view is called.

The condition decorator’s signature looks like this:

condition(etag_func=None, last_modified_func=None)

The two functions, to compute the ETag and the last modified time, will be
passed the incoming request object and the same parameters, in the same
order, as the view function they are helping to wrap. The function passed
last_modified_func should return a standard datetime value specifying the
last time the resource was modified, or None if the resource doesn’t
exist. The function passed to the etag decorator should return a string
representing the ETag for the resource, or None if it doesn’t exist.

The decorator sets the ETag and Last-Modified headers on the response
if they are not already set by the view and if the request’s method is safe
(GET or HEAD).

Changed in Django 1.11:

In older versions, the return value from etag_func() was interpreted as
the unquoted part of the ETag. That prevented the use of weak ETags, which
have the format W/"<string>". The return value is now expected to be
an ETag as defined by the specification (including the quotes), although
the unquoted format is also accepted for backwards compatibility.

Using this feature usefully is probably best explained with an example.
Suppose you have this pair of models, representing a simple blog system:

import datetime
from django.db import models

class Blog(models.Model):
    ...

class Entry(models.Model):
    blog = models.ForeignKey(Blog, on_delete=models.CASCADE)
    published = models.DateTimeField(default=datetime.datetime.now)
    ...

If the front page, displaying the latest blog entries, only changes when you
add a new blog entry, you can compute the last modified time very quickly. You
need the latest published date for every entry associated with that blog.
One way to do this would be:

def latest_entry(request, blog_id):
    return Entry.objects.filter(blog=blog_id).latest("published").published

You can then use this function to provide early detection of an unchanged page
for your front page view:

from django.views.decorators.http import condition

@condition(last_modified_func=latest_entry)
def front_page(request, blog_id):
    ...

Be careful with the order of decorators

When condition() returns a conditional response, any decorators below
it will be skipped and won’t apply to the response. Therefore, any
decorators that need to apply to both the regular view response and a
conditional response must be above condition(). In particular,
vary_on_cookie(),
vary_on_headers(), and
cache_control() should come first
because RFC 7232 requires that the headers they
set be present on 304 responses.

Shortcuts for only computing one value¶

As a general rule, if you can provide functions to compute both the ETag and
the last modified time, you should do so. You don’t know which headers any
given HTTP client will send you, so be prepared to handle both. However,
sometimes only one value is easy to compute and Django provides decorators
that handle only ETag or only last-modified computations.

The django.views.decorators.http.etag and
django.views.decorators.http.last_modified decorators are passed the same
type of functions as the condition decorator. Their signatures are:

etag(etag_func)
last_modified(last_modified_func)

We could write the earlier example, which only uses a last-modified function,
using one of these decorators:

@last_modified(latest_entry)
def front_page(request, blog_id):
    ...

…or:

def front_page(request, blog_id):
    ...
front_page = last_modified(latest_entry)(front_page)

Use condition when testing both conditions¶

It might look nicer to some people to try and chain the etag and
last_modified decorators if you want to test both preconditions. However,
this would lead to incorrect behavior.

# Bad code. Don't do this!
@etag(etag_func)
@last_modified(last_modified_func)
def my_view(request):
    # ...

# End of bad code.

The first decorator doesn’t know anything about the second and might
answer that the response is not modified even if the second decorators would
determine otherwise. The condition decorator uses both callback functions
simultaneously to work out the right action to take.

Using the decorators with other HTTP methods¶

The condition decorator is useful for more than only GET and
HEAD requests (HEAD requests are the same as GET in this
situation). It can also be used to provide checking for POST,
PUT and DELETE requests. In these situations, the idea isn’t to return
a “not modified” response, but to tell the client that the resource they are
trying to change has been altered in the meantime.

For example, consider the following exchange between the client and server:

  1. 用户请求“/foo/
  2. Server responds with some content with an ETag of "abcd1234".
  3. Client sends an HTTP PUT request to /foo/ to update the
    resource. It also sends an If-Match: "abcd1234" header to specify
    the version it is trying to update.
  4. Server checks to see if the resource has changed, by computing the ETag
    the same way it does for a GET request (using the same function).
    If the resource has changed, it will return a 412 status code,
    meaning “precondition failed”.
  5. Client sends a GET request to /foo/, after receiving a 412
    response, to retrieve an updated version of the content before updating
    it.

The important thing this example shows is that the same functions can be used
to compute the ETag and last modification values in all situations. In fact,
you should use the same functions, so that the same values are returned
every time.

Validator headers with non-safe request methods

The condition decorator only sets validator headers (ETag and
Last-Modified) for safe HTTP methods, i.e. GET and HEAD. If you
wish to return them in other cases, set them in your view. See
RFC 7231#section-4.3.4 to learn about the distinction between setting a
validator header in response to requests made with PUT versus POST.

Comparison with middleware conditional processing¶

Django provides simple and straightforward conditional GET handling via
django.middleware.http.ConditionalGetMiddleware. While being easy to
use and suitable for many situations, the middleware has limitations for
advanced usage:

  • It’s applied globally to all views in your project.
  • It doesn’t save you from generating the response, which may be expensive.
  • It’s only appropriate for HTTP GET requests.

You should choose the most appropriate tool for your particular problem here.
If you have a way to compute ETags and modification times quickly and if some
view takes a while to generate the content, you should consider using the
condition decorator described in this document. If everything already runs
fairly quickly, stick to using the middleware and the amount of network
traffic sent back to the clients will still be reduced if the view hasn’t
changed.